SPRING-D210 A4 Tattoo Stencil Printer

The SPRING D210-Tattoo is an A4 thermal stencil printer for tattoo transfer work. Four specifications define what it does: A4 tattoo stencil print width, 20mm/s print speed, USB and Bluetooth interfaces, and a 2600mAh battery. The sections below set out what each one governs, and where a buyer still needs to confirm details before ordering.

What the four specifications cover

Print WidthA4 tattoo stencil

Print Speed20mm/s

InterfaceUSB + Bluetooth

Battery2600mAh

20mm/s

Print speed is listed as 20mm/s. It is the rate figure for this model; it is not a statement about how long a given stencil takes to finish, because that also depends on the artwork length and the file sent to the printer.

Print width and paper

Print width is listed as A4 tattoo stencil, and paper width is A4. For a buyer, that means the printer is specified around A4-format stencil media rather than a roll format. Confirm the stencil paper brand, sheet thickness and any backing requirements with the supplier before ordering, since those are not part of the supplied specification.

Interfaces

The interface is USB + Bluetooth. USB gives a wired connection; Bluetooth is the wireless path for sending a design from a compatible device. The product attributes list the interface as Bluetooth, and the specification lists USB + Bluetooth together. Whether a specific phone, tablet or computer application works with this model is not covered by the supplied facts and should be checked before purchase.

Battery

The battery is 2600mAh. That figure describes the battery capacity of this model. Runtime per charge is not stated in the supplied specifications, so it should not be assumed from the capacity alone.

Where the D210-Tattoo fits in daily work

The A4 format and the battery are the two features that decide how this printer is used. A4 covers the sheet size most studios already buy for transfer stencils, so the printer can be stocked alongside existing paper rather than requiring a separate roll system. The 2600mAh battery removes the need to work next to a wall outlet, which matters when the printer travels between stations or to a client location.

• Fixed studio station: a wired USB connection keeps the printer tied to one workstation, while Bluetooth lets the same unit be sent to from a phone or tablet without re-cabling.

• Mobile or guest-spot work: the battery and the compact body mean the printer can be packed with the rest of the kit and set up wherever the artist is working that day.

• Multi-artist studios: because a stencil can be sent over Bluetooth, several artists can share one printer without each one needing a cable run to their station.

These are ways the listed features can be applied, not claims about output quality on any particular paper or device. The stencil result still depends on the artwork file, the stencil paper used and the sending device, which is why the confirmation list further down matters before a bulk order.

How the specification reads for a buyer

The four listed values are the whole of the supplied specification: A4 tattoo stencil print width, 20mm/s print speed, USB + Bluetooth interface, and a 2600mAh battery. Each one is a configuration fact about this model. None of them, on its own, states how the printer will perform in a particular studio, on a particular stencil paper, or with a particular sending device.

• Print width: listed as A4 tattoo stencil; paper width is A4.

• Print speed: listed as 20mm/s.

• Interface: USB + Bluetooth; the product attributes list Bluetooth.

• Battery: 2600mAh.

Whether the printer matches a given working method depends on the media used, the device sending the file, and how the printer is transported. Those are buyer-side conditions, not values in the supplied specification, so they are best confirmed against your own setup rather than assumed from the four figures above.

Choosing between a sample and a bulk order

The order terms split into two clear paths. A sample order of 1-5 units is the way to test the printer against your own stencil paper, your own artwork files and your own sending device before committing to a larger quantity. Official orders start at 50pcs and above, which suits a studio equipping several stations or a distributor building stock.

Both paths are supplied from stock, and orders can be queued for packing the same day after payment. Sample orders are settled at 100% prepayment; official orders run on 70% prepayment with the 30% balance before shipment, by T/T. If you plan to sell the printer under your own brand or need packaging changes, raise that at the quotation stage, since OEM and ODM cooperation is offered.

Procurement FAQ

Manufacturer

Xiamen Spring Technology Co., Ltd. was established in 1998 and manufactures thermal printers, heat press machines and engraving machines, with OEM and ODM cooperation offered. The company operates 12 production lines in an 11,000 square metre factory and has a 42-person R&D team. At company level, one-to-one engineer support is offered for orders, covering sample confirmation, technical testing and after-sales service.

• Company-level certifications: ISO9001, ISO14001, 3C, ROHS, CE

• Incoming material inspection, printing and processing tests on semi-products and finished products, and appearance checks

• OEM and ODM cooperation methods

These certifications apply to the company's manufacturing and trading operations. They are not stated as certifications of the D210-Tattoo itself.

Order and logistics

Not covered by the supplied specifications and worth confirming before an order: compatible stencil paper brands and sheet thickness, which devices and applications work over Bluetooth, and expected runtime on the 2600mAh battery.