laser-engraving-machines
Which laser engraver materials can you actually process? A buyer-facing matrix of wood, acrylic, leather, glass, coated metal and bare metal — with the diode power or 1064nm wavelength each one needs.
Ask About Your Material
Buyers discover too late that a diode machine cannot mark bare metal, that 3W cannot cut, and that glass only works when painted or covered with color paper. Ordering against the wrong material list wastes the machine budget and delays the product line it was meant to launch.
Our guide maps each material to the diode power or wavelength it actually needs — from 3W engraving units through 5W cutting machines to dual-laser models whose 1064nm head marks bare metal.
A machine matched to your material list from day one, honest limits on what each power level can do, and engineer confirmation on your specific material before ordering.
Wood, bamboo, acrylic, leather, paper and fabric engrave on any diode model. For cutting, the K10-5W handles 3-5mm plywood — the foldable XN001-3W engraves without cutting.
Ask about these machinesMaterial capability check for a US buyer.
The machine works well with our materials. Their engineer gave me professional guidance from sample testing to after sales.
Sample-tested material capability, documented in the published review.
Customer review on our Alibaba storefront (Mark W., United States).
Equipment supply for a Spain-based reseller.
We have ordered many times. The product quality is consistent.
Repeat orders over the cooperation, as stated in the review.
Customer review on our Alibaba storefront (Sofia L., Spain).
Custom material project from a Germany-based buyer.
Their R&D team helped us solve our production requirement. Communication is smooth, they fully understand our project.
Custom requirement delivered with R&D involvement, per the published review.
Customer review on our Alibaba storefront (Thomas M., Germany).
Quality management system certified at our factory, covering manufacturing and trading operations.
Environmental management system certification held by our factory.
Applicable products carry CE marking for the EU market.
RoHS compliance for applicable product lines.
China Compulsory Certification for applicable products sold in China.
Certification scope varies by model and market. Certificates and test reports for a specific product are provided on request before ordering.
Established in Xiamen, China in 1998 with more than 25 years in printers, consumables, laser engraving and heat press equipment.
12 production lines and an 11,000-square-meter factory keep urgent and large orders on schedule.
More than ten years of barcode printer industry experience and multiple patents, with one-to-one engineer support for every order.
Incoming material inspection, semi-product and finished product testing, and appearance checks run on every batch before shipment.
Custom branding, packaging and product configuration for distributors and brand owners, from sample confirmation to mass production.
Products sold to more than 100 countries and regions across Europe, America, Southeast Asia, the Middle East and Africa.
Only when the glass is painted or covered with color paper — the catalog lists bare reflective glass as unsuitable. We can suggest surface prep methods for your glass products.
Yes, but only after the surface is blackened — the catalog lists this as a required prep step. For bare stainless steel, choose a machine with a 1064nm head.
The 5W K10-5W cuts 3-5mm plywood and 5-7mm pine. For production cutting, the L8 line cuts 12-15mm plywood and up to 20mm pine with an air pump and honeycomb board included.
MOQ depends on the model and configuration. Tell us which machine you are considering and our sales team will confirm the terms for your order.
Tell us your scenario, volume and target market. Our engineers reply with a model recommendation, sample plan and quotation for your project.
